| ladsm.com http://ladsm.com/forum/ |
|
| Need help on turbo upgrade http://ladsm.com/forum/viewtopic.php?f=5&t=683 |
Page 1 of 2 |
| Author: | greddylover [ Fri Jul 20, 2007 1:33 am ] |
| Post subject: | Need help on turbo upgrade |
| Author: | greddylover [ Fri Jul 20, 2007 1:35 am ] |
| Post subject: | |
| Author: | Talesin [ Fri Jul 20, 2007 2:49 am ] |
| Post subject: | |
| Author: | SOADweskey [ Fri Jul 20, 2007 6:24 am ] |
| Post subject: | |
Talesin pretty much covered it. Your overall goals for the car have allot to do with what you will need. Running on 91 you will need minimum 660 injectors and a 190lph fuel pump. And I will second that if you get an SAFCII or Neo to tune them 660 are the biggest you should get. If you get then 720s would give you the ability to run more boost. |
|
| Author: | Lenny 15 [ Mon Sep 03, 2007 10:44 am ] |
| Post subject: | |
| Author: | Danny Boy [ Fri Oct 05, 2007 8:27 am ] |
| Post subject: | |
Hope you don't buy it. if you look at your cost to profit ratio you see that the greddy turbo is a REALLY not worthwhile mod. you can get close to the same performance from an Evo3 16G(REAL) and it will cost ALOT less. the greddy turbo is a great part. they just want way to damn much for it. oh and check your CFM rateings too. what turbo are you on now? t25? 290 CFM. 14B? 400 CFM. so on and so forth, but the greddy 18G? 590 CFM!! you have a lot to upgrade before you can throw that in there. good luck. hope you make a good decision. (oh and a good 20G can be had for around a third of what greedy wants for the 18G) |
|
| Author: | Illeagle [ Fri Oct 05, 2007 12:08 pm ] |
| Post subject: | |
a good B16G will put out 550cfm.. Your not going to notice 40cfm. I didnt really feel much a diff between 400cfm on my 14B and the 550 on my b16G |
|
| Author: | Lenny 15 [ Fri Oct 05, 2007 12:48 pm ] |
| Post subject: | |
| Author: | Joe [ Fri Oct 05, 2007 1:41 pm ] |
| Post subject: | |
| Author: | Project2G [ Fri Oct 05, 2007 2:27 pm ] |
| Post subject: | |
| Author: | Synthetek [ Fri Oct 05, 2007 2:41 pm ] |
| Post subject: | |
| Author: | Joe [ Fri Oct 05, 2007 3:51 pm ] |
| Post subject: | |
| Author: | Project2G [ Fri Oct 05, 2007 4:10 pm ] |
| Post subject: | |
| Author: | Joe [ Fri Oct 05, 2007 5:32 pm ] |
| Post subject: | |
| Author: | Project2G [ Sat Oct 06, 2007 10:46 am ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|