| ladsm.com http://ladsm.com/forum/ |
|
| so i was thinking http://ladsm.com/forum/viewtopic.php?f=5&t=1415 |
Page 1 of 3 |
| Author: | Havoc [ Thu Sep 06, 2007 9:19 pm ] |
| Post subject: | so i was thinking |
| Author: | SOADweskey [ Thu Sep 06, 2007 11:26 pm ] |
| Post subject: | |
| Author: | 95talonawd [ Fri Sep 07, 2007 12:39 am ] |
| Post subject: | |
| Author: | SOADweskey [ Fri Sep 07, 2007 6:31 am ] |
| Post subject: | |
I assumed the piping with that intercooler ran to the stock locations so your BOV would still be on the stock upper IC pipe or whatever aftermarket one you are running. But the one have is the SSAC intercooler from ebay. XSpower didn't have any and I found it cheaper from a ebay seller in Upland. $320 delivered to me. There are some pics of my install here |
|
| Author: | RiG [ Fri Sep 07, 2007 7:02 am ] |
| Post subject: | |
I also like my SS auto chrome/ XS power FMIC. It rocks. I have a 20G and I havent ever heat soaked it. You need to trim some of the bumper but its awesome and ite HUGE! 28x10x3.5in for just the core!!! |
|
| Author: | serts [ Fri Sep 07, 2007 2:22 pm ] |
| Post subject: | |
| Author: | 95talonawd [ Fri Sep 07, 2007 3:13 pm ] |
| Post subject: | |
| Author: | SOADweskey [ Fri Sep 07, 2007 3:39 pm ] |
| Post subject: | |
| Author: | Havoc [ Fri Sep 07, 2007 4:31 pm ] |
| Post subject: | |
| Author: | SOADweskey [ Fri Sep 07, 2007 5:44 pm ] |
| Post subject: | |
You can e-mail ssautochrome here customerservice@ssautochrome.com ask them how much for a FMIC kit for a 95 Eclipse GSX. Here is a link to the exact same seller I got mine from. If you want local pickup from this guy don't bid on the auction, just e-mail him and set it up. |
|
| Author: | Havoc [ Fri Sep 07, 2007 11:07 pm ] |
| Post subject: | |
so the ebay link is the same exact guy u bought it from? its the same exact fmic kit you got right? sorry about all the questions.... lol would I need to buy anything else? thanks in advance |
|
| Author: | SOADweskey [ Sat Sep 08, 2007 12:53 am ] |
| Post subject: | |
That is the exact one I bought. What turbo setup do you have? The pipeing is designed to go to the stock output location of a 20G turbo but I made it work with my 16G with some minor modifications. On my setup I needed these extra parts. (6) hose clamps that can go to 2.5" (the clamps with the kit sucked) (4) hose clamps that can go to 2.25" (1) 6" length of 2.5" rubber or silicone tubing |
|
| Author: | Havoc [ Sat Sep 08, 2007 10:56 am ] |
| Post subject: | |
I still have the stock t25 but I'm getting the fmic now so I don't have to remove my bumper anymore as soon as I get my fmic I'm going to paint the car I don't want to get thefmic later because I'd run the risk of chipping or scratching my bumper so wil it work with the t25? I plan on getting the 16g my plan is fmic,paint,cf hood, injectors, fuel pump, fuel pressure regulator,then the 16g |
|
| Author: | Lenny 15 [ Sat Sep 08, 2007 3:43 pm ] |
| Post subject: | |
well, its a different kit if you are getting a 16G, but you can just change the piping later |
|
| Author: | Havoc [ Sat Sep 08, 2007 5:57 pm ] |
| Post subject: | |
yea I won't be getting the 16g till a WHILEEEe so as long as it fits my t25 that's all that matters for now when I get the 16g if I need different piping ill do that at that time so this kit will work with my t25? if so ill buy it now thanks again for all the help guys |
|
| Page 1 of 3 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|