| ladsm.com http://ladsm.com/forum/ |
|
| Clutch issues http://ladsm.com/forum/viewtopic.php?f=5&t=1259 |
Page 1 of 2 |
| Author: | RiG [ Fri Aug 24, 2007 7:16 am ] |
| Post subject: | Clutch issues |
| Author: | SOADweskey [ Fri Aug 24, 2007 7:24 am ] |
| Post subject: | |
| Author: | Illeagle [ Fri Aug 24, 2007 9:18 am ] |
| Post subject: | |
| Author: | clockworktoy [ Fri Aug 24, 2007 10:10 am ] |
| Post subject: | |
| Author: | Illeagle [ Sat Aug 25, 2007 12:15 am ] |
| Post subject: | |
| Author: | clockworktoy [ Sat Aug 25, 2007 1:40 am ] |
| Post subject: | |
| Author: | Illeagle [ Sat Aug 25, 2007 7:47 am ] |
| Post subject: | |
| Author: | clockworktoy [ Sat Aug 25, 2007 8:29 am ] |
| Post subject: | |
| Author: | RiG [ Mon Aug 27, 2007 9:22 pm ] |
| Post subject: | |
Heres the pictures. What would cause it to break like it did? The little metal piece I found after I pulled the pressure plate off. Im going to get the flywheel turned and replace the clutch assembly. The clutch surface seems to have a lot of meat left on it.... Pulling the trans is not fun. I recommend changing all you can BEFORE you pull the trans. I changed the master cylinder and slave cylinder before I pulled the trans. At least I wont have to change them now that they are new. haha. Good luck finding out whats wrong with your car |
|
| Author: | H8VTEC [ Tue Aug 28, 2007 12:23 am ] |
| Post subject: | |
| Author: | Synthetek [ Tue Aug 28, 2007 2:37 am ] |
| Post subject: | |
what kind of flywheel is that? |
|
| Author: | RiG [ Tue Aug 28, 2007 7:02 am ] |
| Post subject: | |
XACT chromoly flywheel. I got it and the clutch from RRE |
|
| Author: | Illeagle [ Tue Aug 28, 2007 11:23 am ] |
| Post subject: | |
| Author: | SOADweskey [ Tue Aug 28, 2007 11:27 am ] |
| Post subject: | Re: Clutch issues |
| Author: | Synthetek [ Tue Aug 28, 2007 4:49 pm ] |
| Post subject: | Re: Clutch issues |
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|