buy a set of rear differential bushings from RRE
made by yours truly
and some shifter plate bushings too
http://www.roadraceengineering.com/ecldrivetrain.htm
| ladsm.com http://ladsm.com/forum/ |
|
| Project automatic bye bye http://ladsm.com/forum/viewtopic.php?f=5&t=11482 |
Page 1 of 8 |
| Author: | Wally [ Mon Jun 21, 2010 8:33 pm ] |
| Post subject: | Project automatic bye bye |
Well finally got a chance to start working on this. Ive been trying to go 5 speed for the longest now that my chance is here im not backing out. Automatic was fun but not for me. I will update my conversion on here all the time WITH PICS CAUSE I KNOW YOU LIKE PICS!!. I know there are some doubts about me doing this and I've been doing my research non stop. The way I plan on doing this is getting the easy stuff out first. Dropping the whole rear subframe driveshaft tranny pulling the engine harness front axles shift cables shifter itself TCU pedal assembly and a lot more things. Tomorrow I will post pics of how far I am but I know its stupid to start this before MOD but there is always next year if they do it. If you guys have any tips and I mean any tips PLEASE LET ME KNOW anything that will make this easier. Some people say why not sell and buy a 5 speed well cause thats boring. I want to see if I can accomplish this myself. Tomorrow everything will begin im just waiting on my act 2100 and street disc and I know I need to buy a new fork and ball. If im missing anything please let me know. Couple questions?? 1. Any tips on pulling the engine harness? 2. What else should I do while my whole drivetrain is out? |
|
| Author: | fmedgsx [ Mon Jun 21, 2010 10:08 pm ] |
| Post subject: | Re: Project automatic bye bye |
you will meed to drill out the hole for the master cylinder as the auto one is just stamped. as for the engine harness everything is straight forward you will need to pull out the drivers seat to unplug the rear o2 and then all 4 of the plugs behind the radio. plus the ones for the ecu. with the rear subframe the emergency brake will need to be unhooked at the handle and pulled through the body. |
|
| Author: | Black_gst [ Tue Jun 22, 2010 1:07 pm ] |
| Post subject: | Re: Project automatic bye bye |
buy a set of rear differential bushings from RRE made by yours truly and some shifter plate bushings too http://www.roadraceengineering.com/ecldrivetrain.htm |
|
| Author: | Illeagle [ Tue Jun 22, 2010 3:58 pm ] |
| Post subject: | Re: Project automatic bye bye |
we got a few set in stock. They are bad ass. Quiet and solid. |
|
| Author: | Wally [ Tue Jun 22, 2010 4:05 pm ] |
| Post subject: | Re: Project automatic bye bye |
| Author: | fmedgsx [ Tue Jun 22, 2010 9:19 pm ] |
| Post subject: | Re: Project automatic bye bye |
shifter base has the bushings and the cables already have skate board bearings pressed in |
|
| Author: | whitegsx97 [ Thu Jun 24, 2010 12:28 pm ] |
| Post subject: | Re: Project automatic bye bye |
A Wally i thought you liked auto more then the 5 speed? Well good luck with swapping seriously! |
|
| Author: | Wally [ Fri Jul 02, 2010 8:05 pm ] |
| Post subject: | Re: Project automatic bye bye |
| Author: | Wally [ Wed Jul 07, 2010 9:31 pm ] |
| Post subject: | Re: Project automatic bye bye |
BAM pics ive been lazy. Everything so far was easy including the wiring harness. Ive read that many people give up and dont complete the swap but im going with it one way or another. My first 5 speed swap .The wiring harness and shifter assembly  The tranny cleared of all obstacles so I can begin dropping it  The carnage on the inside brake pedal out and shifter assembly  The shifter missing ?? 
|
|
| Author: | socalGST [ Thu Jul 08, 2010 8:25 am ] |
| Post subject: | Re: Project automatic bye bye |
Good work, keep us updated. |
|
| Author: | Illeagle [ Thu Jul 08, 2010 12:08 pm ] |
| Post subject: | Re: Project automatic bye bye |
wow, props Mr. Wally. I gave up trying to pull my ECU harness when I was doing the chassis swap. I got to the stuff behind the dash and said...fuck that...LOL. |
|
| Author: | Black_gst [ Thu Jul 08, 2010 12:31 pm ] |
| Post subject: | Re: Project automatic bye bye |
GOOD JOB! harness swap is pretty easy i have pulled them a couple times unpluging all the plugs under the dash is the hardest part lol some of the little relays are different from year to year and maybe from 5spd to auto when i swapped a 5 spd harness into my talon after pulling the auto one out i noticed there were a couple relays that had different plugs so be sure to take any relays from under the dash of the 5 spd with the 5spd harness because them might be different. mine looked like the same relay but the plugs were different |
|
| Author: | Wally [ Sat Jul 10, 2010 2:46 am ] |
| Post subject: | Re: Project automatic bye bye |
hahaha come Sam you gave up on a harness you rebuild trannies and gave up on a harness lol. Im making it seem like it was TOOO easy well it wasnt I was shedding tears one the ECU harness  lol. Those TCU harness weren't helping the cause either but its out so here are my update on the 5 speed swap im 50 percent done on removing all the auto stuff. Thanks adam for the heads up but I cant expect it to be a direct swap there are some things im going to have to buy but ill let the guy im trading parts know about it thanks Adam and Sam for the props lol.Ass up face down thats the way I like to....... lol  Didnt know my car had LSD this whole time lol  FINALLY ITS DOWN!!!!!  The subframe on the ground finally got it out better pics tomorrow but everyone will be at MOD lol. 
|
|
| Author: | Wally [ Sun Jul 11, 2010 3:35 pm ] |
| Post subject: | Re: Project automatic bye bye |
Im having a hard time pulling the trans. Since I think I worked backwards I pulled the rear stuff first big mistake now I have no way of jacking up the front of the car and the rear of the car has no place to sit since the rear subframe is out. How should I do it here is a pic of the car how it stands now with no rear subframe. How should I go about pulling the trans. Everything is disconnected of the tranny the only thing holding it in are the axles and mounts and to the block. So any hints on how I should do this. Here it is once I pull the tranny everything will be good to go so I can start throwing on the 5 speed stuff. I drilled a hole on the firewall already PITA. In this pic the rear frame is still in but its out thats how the car stands look how low the front is its less then half an inch of the ground. Heres my subframe lol i want to see somebody else pull this thing by themself it weights ALOT!!!! 
|
|
| Author: | Wally [ Mon Jul 12, 2010 11:24 am ] |
| Post subject: | Re: Project automatic bye bye |
Do you guys recommend I pull the motor and tranny together will it make things easier or no. While the motor is out should I delete anything like the charcoal canister the egr even though it will throw a check engine light all that crap against the firewall. |
|
| Page 1 of 8 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|