| ladsm.com http://ladsm.com/forum/ |
|
| good and bad http://ladsm.com/forum/viewtopic.php?f=4&t=5149 |
Page 1 of 2 |
| Author: | jstoned1 [ Fri Aug 29, 2008 5:37 pm ] |
| Post subject: | good and bad |
| Author: | Illeagle [ Fri Aug 29, 2008 5:55 pm ] |
| Post subject: | |
| Author: | Talesin [ Fri Aug 29, 2008 5:55 pm ] |
| Post subject: | |
| Author: | jstoned1 [ Fri Aug 29, 2008 6:00 pm ] |
| Post subject: | |
| Author: | HBWaterfowler [ Fri Aug 29, 2008 7:04 pm ] |
| Post subject: | |
| Author: | SOADweskey [ Fri Aug 29, 2008 8:45 pm ] |
| Post subject: | |
| Author: | ghetto_bird [ Fri Aug 29, 2008 9:26 pm ] |
| Post subject: | |
| Author: | jstoned1 [ Fri Aug 29, 2008 9:53 pm ] |
| Post subject: | |
| Author: | 1fast2G [ Fri Aug 29, 2008 11:22 pm ] |
| Post subject: | |
| Author: | jstoned1 [ Sat Aug 30, 2008 9:38 am ] |
| Post subject: | |
| Author: | ghetto_bird [ Sat Aug 30, 2008 12:15 pm ] |
| Post subject: | |
| Author: | jstoned1 [ Sat Aug 30, 2008 1:23 pm ] |
| Post subject: | |
| Author: | Illeagle [ Sat Aug 30, 2008 2:55 pm ] |
| Post subject: | |
vac leak will cause a lean idle and rich under boost |
|
| Author: | Talesin [ Sat Aug 30, 2008 4:58 pm ] |
| Post subject: | |
That's about right for a 1G, I'd run it just a little richer just to be on the safe side. With the vac line on, you should be seeing between 27-30psi at idle after the warmup, when the FPR solenoid opens and lets vacuum reference through. |
|
| Author: | ghetto_bird [ Sat Aug 30, 2008 9:50 pm ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|