| ladsm.com http://ladsm.com/forum/ |
|
| 5Zigen's or Rotas, photoshop? http://ladsm.com/forum/viewtopic.php?f=26&t=11173 |
Page 1 of 1 |
| Author: | Black_gst [ Wed Apr 21, 2010 8:54 am ] |
| Post subject: | 5Zigen's or Rotas, photoshop? |
http://www.dynotechonline.com/store/images/p45r_2.jpg so i cant decide on these black 5zigen's 17x9+35 http://i1.frsimg.com/images/detailed_im ... ish_01.jpg or these bronze Rotas 17x9+30 does anyone have some photo shop skills http://picasaweb.google.com/lh/photo/it ... directlink |
|
| Author: | clockworktoy [ Wed Apr 21, 2010 10:48 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
17x9 +30 will stick out way too much, i would suggest you stick somewhere between +35 and +32 depending on what tire your going to run on the wheel. |
|
| Author: | Black_gst [ Wed Apr 21, 2010 10:55 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
im going to go with a 255/40 but i am going to roll the fenders to fit since i have a 2ga i will have a fitment problem with a +35 so i will need at least a 3mm spacer if not a 5mm spacer. |
|
| Author: | christ [ Wed Apr 21, 2010 11:24 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
I think I'd always choose the one that's not Rota. |
|
| Author: | Black_gst [ Wed Apr 21, 2010 11:28 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
yeah i have heard the stories lol... but at least replacments are cheap. i think as long as you dont hit anything they are fine |
|
| Author: | Black_gst [ Wed Apr 21, 2010 11:37 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
of how about the bronze 5zigen's in the same style? |
|
| Author: | hectik [ Wed Apr 21, 2010 11:39 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
| Author: | christ [ Wed Apr 21, 2010 11:52 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
Sam already proved bronze looks good on white. I would probably stay with a lighter color than black on your white if it were me. I also like the 5Zigens over the Rota spokes. |
|
| Author: | clockworktoy [ Wed Apr 21, 2010 12:21 pm ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
As far as i know the only differences are the knucles in the rear won't clear a +35 on an awd im not sure if the fwd are the same or not. The fronts should be the same iirc. |
|
| Author: | Black_gst [ Wed Apr 21, 2010 12:22 pm ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
| Author: | Black_gst [ Wed Apr 21, 2010 12:25 pm ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
i think im going to go with the bronze 5zigens. i will likely have to run a spacer in the rear but oh well. maybe ill change the knuckle later. |
|
| Author: | hectik [ Wed Apr 21, 2010 12:30 pm ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
| Author: | EvilMonkeyDSM [ Sat Apr 24, 2010 11:26 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
I have always been a fan of the 5zigen FN01R-C's, but I have never had any problems with Rota in the past. I had rota's on my s2000 and loved them. If I could afford 5zigen's, I would get those. |
|
| Author: | ooljima [ Sat Apr 24, 2010 11:37 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
I personally have the matte black fno1r-c on the 2gb. 17x8 35mm offset with BFG 255-40-17. This size tire is the upper limit for a 8 inch wide wheel. Rear fenders are rolled. The front tires stick out about half an inch past the fender. The rear is about perfect. Personally, a 32 or 33 mm offset with a 8.5 inch wide wheel would be perfect for a 2gb application. 
|
|
| Author: | Black_gst [ Sun Apr 25, 2010 10:13 am ] |
| Post subject: | Re: 5Zigen's or Rotas, photoshop? |
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
