Im selling a sheet metal intake manifold for a 1g or 2g GST OR GSX...its in perfect condition and works Awesome just a little bit to much for my set up...For all you big turbo guys this would be a easy 50+ hp gain with the proper tunning..The throttle body flange is for a 60mm 1g 92-94 TB..all vacuum line are there..this mani deleted EGR...Don't get me wrong if you guys are still running 16g turbo's this will still work good to...again with the proper tunning...This intake mani is for guys with 6 bolt swaps..the runner size are the same as a 1g head and also has the flange for the map sensor in the stock location..it was on my 2g head but my head was milled and polished to match the same size as a 1g head...if you 1g guys are interested all you would need to do is get the map sensor flange closed..just to weld a little aluminum plate to block it off cost maybe 20 bucks..let me know
let me know if your interested guys...its works great and has ZERO cracks
chris at 805 300 7154 or blkturbogsx@yahoo.com
